1.1 System Design
System-level specification, modeling, and simulation
System design flows and methods
HW/SW co-design, co-simulation, co-optimization, and co-exploration
HW/SW platforms for rapid prototyping
System design case studies and applications
System-level issues for 3D integration
Micro-architectural transformation
Memory architecture and system synthesis
System communication architecture
Network-on-chip design methodologies and CAD
Network-on-chip design case studies and prototyping
1.2 Hardware for Embedded Systems
Multi-core/multi-processors systems
HW/SW co-design for embedded systems
Static and dynamic reconfigurable architectures
Memory hierarchies and management
System-level consideration of custom storage architectures (flash, phase change memory, STT-RAM, etc.)
Application-specific instruction-set processors (ASIPs)
Hardware and devices for neuromorphic and neural network computing
Design method for learning on a chip
New hardware techniques for approximate/stochastic computing
1.3 Embedded System Software
Real-time software and operating systems
Middleware and virtual machines
Timing analysis and WCET
Programming models for multi-core systems
Profiling and compilation techniques
Design exploration, synthesis, validation, verification, and optimization
Embedded software development
Embedded runtime support and resource management
1.4 System-level Security
Hardware-based security (CAD for PUF’s, RNG, AES etc)
Detection and prevention of hardware Trojans
Side-channel attacks, fault attacks and countermeasures
Split manufacturing for security
System software security techniques
Design for security
CAD for security
Security implications of CAD
Cyberphysical system security
Nanoelectronic security
Counterfeiting
Supply chain security
1.5 Dark Silicon and Power/Thermal Considerations in System Design
Power and thermal estimation, analysis, optimization, and management techniques for hardware and software systems
Energy- and thermal-aware application mapping and scheduling
Energy- and thermal-aware dark silicon system design and optimization
Energy- and thermal-aware architectures, algorithms and techniques
Run-time management for the dark silicon
1.6 System Design Issues for Heterogeneous Computing
Hardware-software partitioning of workloads
Modeling and simulation of heterogeneous platforms
High-level synthesis for heterogeneous computing
Power/performance analysis of heterogeneous and cloud platforms
Programming environment of heterogeneous computing
Acceleration techniques including GPGPU and FPGA and dedicated ASIC’s
Application driven heterogeneous platforms for big data, machine learning etc.
Cloud Internet-of-Things (IoT) applications
Interaction of Internet-of-Things (IoT) devices and the cloud
Cloud computation for Internet-of-Things (IoT) devices
Systems for neural computing (including deep neural networks)
Applications and designs for systems based on optical devices
2.1 High-level, Behavioral, and Logic Synthesis and Optimization:
High-level/Behavioral/Logic synthesis
Technology-independent optimization and technology mapping
Functional and logic timing ECO
Resource scheduling, allocation, and synthesis
Interaction between logic synthesis and physical design
2.2 Testing, Validation, Simulation, and Verification
High-level/Behavioral/Logic modeling and validation
High-level/Behavioral/Logic simulation
Formal, semi-formal, and assertion-based verification
Equivalence and property checking
Emulation and hardware simulation/acceleration
Post-silicon functional validation
Digital fault modeling and simulation
Delay, current-based, low-power test
ATPG, BIST, DFT, and compression
Memory test and repair
Core, board, system, and 3D IC test
Post-silicon validation and debug
Analog, mixed-signal, and RF test
2.3 Cell-Library Design, Partitioning, Floorplanning, Placement
Cell-library design and optimization
Transistor, gate, and wiring sizing
High-level physical design and synthesis
Estimation and hierarchy management
2D and 3D partitioning, floorplanning, and placement
Post-placement optimization
Buffer insertion and interconnect planning
2.4 Clock Network Synthesis, Routing, and Post-Layout Optimization and Verification
2D and 3D clock network synthesis
2D and 3D global and detailed routing
Package-/Board-level routing and chip-package-board co-design
Post-layout/-silicon optimization
Layout and routing issues for optical interconnects
3.1 Design for Manufacturability
Process technology characterization, extraction, and modeling
CAD for design/manufacturing interfaces
CAD for reticle enhancement and lithography-related design
Variability analysis and statistical design and optimization
Yield estimation and design for yield
Physical verification and design rule checking
3.2 Design for Reliability
Analysis and optimization for device-level reliability issues (stress, aging effects, ESD, etc.)
Analysis for interconnect reliability issues (electromigration, thermal, etc)
Reliability issues related to soft errors
Design for resilience and robustness
Reliability issues for optical devices
3.3 Timing, Power Networks, and Signal Integrity
Deterministic and statistical static timing analysis and optimization
Power and leakage analysis and optimization
Circuit and interconnect-level low power design issues
Power/ground network analysis and synthesis
Signal integrity analysis and optimization
3.4 CAD for RF/Analog and Multi-Domain Modeling and Interconnect
CAD for analog, mixed-signal, RF
CAD for mixed-domain (semiconductor, nanoelectronic, MEMS, and electro-optical) devices, circuits, and systems
CAD for nanophotonics and optical devices
Analog, mixed-signal, and RF noise modeling and simulation
Device, interconnect and circuit extraction and simulation
Package modeling and analysis
EM simulation and optimization
Behavior modeling of devices and interconnect
Modeling of complex dynamical systems (molecular dynamics, fluid dynamics, computational finance, etc.)
4.1 Biological Systems and Electronics
CAD for biological computing systems
CAD for systems and synthetic biology
CAD for bio-electronic devices, bio-sensors, MEMS, and systems
4.2 Nanoscale and Post-CMOS Systems
New device structures and process technologies
New memory technologies (flash, phase change memory, STT-RAM, memristor, etc.)
Nanotechnologies, nanowires, nanotubes, graphene, etc.
Quantum computing
Optical devices and communication
CAD for bio-inspired and neuromorphic systems
4.3 CAD for Cyber-Physical Systems
CAD for Internet-of-Things (IoT) and sensor networks
Design issues for Internet-of-Things (IoT) Devices
Modeling and analysis of CPS
CAD for automotive systems and power electronics
Dependable and safe CPS design
Analysis and optimization of data centers
CAD for display electronics
Green computing (smart grid, energy, solar panels, etc.)
